2.Kits Brief overview
WLA-01 IPC Kits HD cctv camera,based on standard H.264、AVI, Full HD 1080P reselution,provide complete function supporting programs, apply to all kings of spaces(such as house,shop,school,surpermarket);HD、low bit rate cctv camera will provide custormer a low cost and high Cost-effective IPC solution.Support standard ONVIF,compatible HIKVISION、Dahua and so on and NVR eqiupment and telephone、computer real-time detection.
3、IPC feature
- H.264, AVI compression format , synchronous real-time monitoring and high-definition video
- Full HD 1080P real-time image transmission, adaptive network , up to 25/30 frames / sec smooth experience
- echo cancellation and noise suppression technology , the perfect full-duplex voice effect
- owns Granville Technology Zhiyun P2P penetration technology , a key remote , plug and play
- AirJoin ,a key initiative to set WIFI, step network , the ultimate simple
- ONVIF2.4 supports standard protocols , compatible with Hikvision, Dahua , and other mainstream NVR equipment
- Horizontal and vertical rotation , multi-faceted cruise
- support multi-user remote preview
- Camera Specification:
1)Support Linkage Alarm 433.92MHZ
2) 1/4″ 1.0MP 1145 CMOS, 3.6mm Lens
3) IR Cut: 10m(4pcs array LEDs)
4)Resolution:1.0 MP, 1280*720
5) Built-in pan / tilt, H 355 °, V 90 °, 6) support TF card memory (up to 32G) External WIFI built-in audio 7))camera Size: 120*120*130mm
8). Motion detection, email alert, FTP upload
9). Color: White.
10). P2P, Support QR code scanning to view on Iphone and andriod Mobiles
11).Yoosee App
12), Kit Packing: 1 set/colorbox
Camera Technical sheet:
System | Host processor | Industrial embedded microcontroller GM8135S-QC |
Operating system | Embedded LINUX operating system | |
Vedio | Image Sensor | 1080p CMOS |
Vidio compression | H.264、AVI | |
Video Standard | PAL、NTSC | |
Monitoring image quality | 1920*1080/*1280*720/640*480/320*180 | |
Video Quality | 1920*1080/1280*720/640*480 | |
Image motion detection | support | |
Min illumination | 0.1LUX/F1.2 | |
Grab function | support | |
Video Flip | support | |
Audio | Coding Standards | amr |
Audio Input | support | |
Audio output | support | |
Recording Management | Video mode | Manual Recording、Motion detection recording、Timer recording、Alarm recording |
Recordings storage | Micro SD card | |
Remote Playback、download | support | |
Alarm is triggered | Video Push、Speaker alarm、Alarm recording、grab、sending Email | |
Net | Wired Ethernet port | RJ-45 10-100MB auto Adapted Ethernet interface |
wireless network | 802.11b/g/n | |
Stream | Tri-streaming | |
NIV | Support TCP/IP、RTSP、ONVIF etc. | |
P2P networking | Gwell ,Grain Cloud | |
WIFI networking | Gwell ,Grain Cloud | |
Expend | IR-CUT | support |
Micro SD card | Maximum support 32GB TF card | |
WIFI | support | |
433MHz alarm | support | |
Lens | 3.6MM | |
powered by | power supply | DC 5V 2A |
power | 5W | |
condition | Storage temperature | 0℃-+55℃ |
Storage humidity | 10%-90% | |
others | Size(L*W*H) |
5、Smoke detector Technical data
Power: DC9V alkaline battery or carbon battery;
working current: a small quiescent current 10uA, alarm working current between 10-30mA;
Output: wireless signal transmission, 315MHz or 433MHz;
Smoke sensitivity: The sensor accords with UL217 standard;
working environment: temperature -5 ℃ -50 ℃, humidity 10-90% non-condensing;
Buzzer sound intensity: 10 feet above 85 decibels;
Battery life: 1 year or so, when the detector voltage is too low, about every minute will be issued a short call to remind the user to replace the battery.
Wireless smoke detector Applications: Suitable for installation in less smoke, smoke detection smoke smoke, suitable for use with most weak control system. Is the smart home and security host with the best products.
6、Door sensor technical data
Wireless door sensor is mainly used for a variety of anti-theft alarm, usually installed in the door or window, when the door or window is opened, the wireless sensor will immediately wireless sensor signal transmitted to the wireless host, the signal contains the address and State, the host can identify the alarm location, location.
Wireless door sensor with high reliability, frequency stability, low power consumption and other characteristics; internal circuit design using SAW resonator frequency stabilization, and the use of SMD process, a variety of frequency options (260MHZ, 310MHZ, 315MHZ, 433MHZ ).
Power supply with + 12V battery, the battery power is weak when the LED prompts to remind the user to replace the battery.
quiescent current (DC12V) ≤ 5uA
Static power consumption: DC <0.3mW
working current (DC12V) ≤ 6mA
low voltage instructions action voltage ≤ 8V
Encoding: fixed code (2262), learning code (EV1527)
Transmit power:> 20MW
launch time 1.5S ~ 3S
Work indicator light (red)
Reference launch distance (DC12V) ≥80 meters (without interference to open areas)
Magnetic effective distance: (1) pull (2) release 10mm 15mm trigger
l use of the environment: Relative temperature -30 ℃ ~ +50 ℃ Relative humidity
7、PIR detector technical data
Wireless infrared detection sensor features:
Digital intelligent circuit design, automatic temperature and humidity compensation;
Strong ability to resist white light;
Anti-interference and electromagnetic radiation ability;
Induction time adjustable;
Micro-power design;
can prevent small animals.
Technical parameters:
working current: static keep current: 35μA, alarm working current: 25mA;
Operating frequency: 315 / 433MHz;
Frequency deviation: ± 0.2MHz;
Transmitting power: 10mW;
Power on stabilization time: 3-5 minutes;
Detection range: 90o level;
Maximum detection range: 8m;
pulse counter: programmable pulse 1, 2, 3 times;
Reset memory function: After the last alarm, the memory function disappears for 5 minutes (can set different time according to user’s requirement);
Working voltage: DC9V laminated battery;
Low voltage indication: when the voltage is lower than 8V LED flashing;
Alarm time: 6s ~ 8s or 36s ~ 40s optional;
Operating temperature: -20oC ~ +60 oC;
Specifications (LWH): 110X65X48mm (not including bracket).